Low Voltage Railway Goods Transfer Trolley
Working principle:
KPD series railway flat carts are powered by the low voltage electricity from the railways. The power source AC 380v is transformed into AC 36v two-phase and are respectively connected to the two rails.
Then the wheels and conducting plate lead the AC 36v electricity to the electrical appliance box which
is installed on the carts. And then the AC 36v is transformed into DC 36V through the transformer. then
controls DC Metallurgy motor through DC control system to make the flat carts start, stop, go forward and backward and adjust the speed and so on.
Characters:
1) powered by low voltage electricity from railways
2) using time is not limited
3) load capacity is not limited
4) high safety level
5) flexible, stable start ,big starting torque,small impact to the gear reducer
6) high use frequency and not too short running distance
7) long service life
8) run on the rails "S", arc-shaped, direct running
9) variable speed device(VFD)
10) hydraulic lifting device can be installed
11) can be used frequently
Parameters:
Model |
KPD-10 |
KPD-20 |
KPD-50 |
KPD-100 |
KPD-150 |
Rated Load(t) |
10 |
20 |
50 |
100 |
150 |
Table Size(mm) |
Length(L) |
2000 |
4000 |
5500 |
6500 |
10000 |
Width(W) |
1500 |
2200 |
2500 |
2800 |
3000 |
Height(H) |
450 |
550 |
650 |
850 |
1200 |
Wheel Base(mm) |
1200 |
2800 |
3200 |
4900 |
7000 |
Rail Inner Gauge(mm) |
1435 |
1435 |
1435 |
2000 |
2000 |
Wheel Diameter(mm) |
400 |
400 |
500 |
600 |
600 |
Wheel Quantity |
4 |
4 |
4 |
4 |
8 |
Ground Clearance(mm) |
50 |
50 |
50 |
75 |
75 |
Running Speed(min) |
25 |
20 |
20 |
20 |
18 |
Motor Power(kw) |
2 |
2.5 |
5.5 |
11 |
15 |
Transformer power(KVA) |
3 |
6.8 |
10 |
30 |
30 |
Transformer quantity |
1 |
1 |
1 |
1 |
1 |
Running distance(m) |
80 |
80 |
50 |
50 |
50 |
Max Wheel Load(KN) |
14.4 |
77.7 |
174 |
343.8 |
265.2 |
Recommended Rail Model |
P15 |
P24 |
P43 |
QU100 |
QU100 |
Pictures: